Dekoll Beton Contact Primer Paint 20kg
• It is a liquid material based on acrylic resin, which is used for the treatment of smooth concrete surfaces
• Bonding layer for the treatment of concrete surfaces
• Size: 20kg
• Bonding layer for the treatment of concrete surfaces
• Size: 20kg
Barcode :
5301000462177
€39.95
Availability : In stock
Product code :
72910
Barcode :
5301000462177
- - Pickup from Store
- - Home Delivery (Free Shipping for orders over €200)
Product Description:
Binding layer used for the treatment of areas smooth concretefor inside and outside.
Features:
It is a liquid material based on acrylic resin, which is used for the treatment of smooth concrete surfaces. Ensures a very good bond between concrete and filling layers such as mortar, grout, putty, waterproofing, etc.
The use of this material eliminates the need to use cement plaster on smooth concrete surfaces.
The surface treatment with concrete primer ensures a fairly good workability as well as obvious ease in the application of other layers.
Uniforms the degree of absorbency of the surface where it will be applied.
Technical Data:
It is used for the treatment of smooth concrete surfaces which will then be filled with filler mortar, grout, etc. It is used as an insulator, fixing surfaces that will then be painted or covered with other layers such as mortar, grout, etc. The product is applied with a brush or roller uniformly on the entire surface. It is necessary to wait 12-24 hours for PRIMER CONCRETE to dry depending on the temperature to apply the subsequent product at low temperatures as well as the presence of moisture significantly increase the drying time. It should not be applied when the substrate has a temperature lower than +5°C and we must make sure that it will not get wet for up to 24 hours after application. Type: Bonding layer for the treatment of concrete surfaces.
Density (EN ISO 2811-1): 1.62 ± 0,02gr / cm3
Dilution: 10% with pure water Viscosity: 130-140 KU (25°C) Drying time: Dry after 12-24 hours.
The drying time depends on the weather conditions (temperature, humidity).
VOC in the finished product: ≤ 10 VOC emissions in the environment: ≤ 0.2
Coverage rate: 4-5 m2 /kg on surfaces prepared for painting, depending on the absorbency of the surface.
Flammability: Non-flammable
Temperature for application: +5° to +35°C and relative humidity lower than 80%.
Packaging: 20 kg. Storage: 24 months in original packaging. Store in places protected from exposure to the sun. Protect it from frost.
Binding layer used for the treatment of areas smooth concretefor inside and outside.
Features:
It is a liquid material based on acrylic resin, which is used for the treatment of smooth concrete surfaces. Ensures a very good bond between concrete and filling layers such as mortar, grout, putty, waterproofing, etc.
The use of this material eliminates the need to use cement plaster on smooth concrete surfaces.
The surface treatment with concrete primer ensures a fairly good workability as well as obvious ease in the application of other layers.
Uniforms the degree of absorbency of the surface where it will be applied.
Technical Data:
It is used for the treatment of smooth concrete surfaces which will then be filled with filler mortar, grout, etc. It is used as an insulator, fixing surfaces that will then be painted or covered with other layers such as mortar, grout, etc. The product is applied with a brush or roller uniformly on the entire surface. It is necessary to wait 12-24 hours for PRIMER CONCRETE to dry depending on the temperature to apply the subsequent product at low temperatures as well as the presence of moisture significantly increase the drying time. It should not be applied when the substrate has a temperature lower than +5°C and we must make sure that it will not get wet for up to 24 hours after application. Type: Bonding layer for the treatment of concrete surfaces.
Density (EN ISO 2811-1): 1.62 ± 0,02gr / cm3
Dilution: 10% with pure water Viscosity: 130-140 KU (25°C) Drying time: Dry after 12-24 hours.
The drying time depends on the weather conditions (temperature, humidity).
VOC in the finished product: ≤ 10 VOC emissions in the environment: ≤ 0.2
Coverage rate: 4-5 m2 /kg on surfaces prepared for painting, depending on the absorbency of the surface.
Flammability: Non-flammable
Temperature for application: +5° to +35°C and relative humidity lower than 80%.
Packaging: 20 kg. Storage: 24 months in original packaging. Store in places protected from exposure to the sun. Protect it from frost.
Barcode :
5301000462177
Write Your Own Review