Dekoll Termofix 2In1 White Insulation Boards Adhesive
• Fibre-reinforced adhesive and leveler for thermal insulation boards, EPS, for facades and chocolatura
• Colour: White
• Packaging: 25kg
• Colour: White
• Packaging: 25kg
Barcode :
€7.10
Availability : In stock
Product code :
70982
Barcode :
- - Pickup from Store
- - Home Delivery (Free Shipping for orders over €200)
Product Description:
Dekoll Termofix 2In1 White 25kg
Fibre-reinforced adhesive and leveler for thermal insulation boards, EPS, for facades and chocolatura.
It has very good workability and high moisture resistance. Maximum layer thickness for leveling up to 4mm and for sticking up to 30mm.
Technical Data:
Appearance: Powder
Packaging: 25kg
Color: White
Granulation: 0.7mm
Storage: Store in dry places on wooden pallets.
Storage time: 12 months from the production date
Water for mixing: 7.5-8 liters/bag
Application temperatures: From 5°C to 35°C.
Application thickness: Up to 3mm
Volumetric mass: 1.4kg/m3
Consumption: 7-8kg/m2
Compressive strength: 12N/mm2
Bending strength: 5N/mm2
Adhesion to concrete (28 days): 1.30N /mm2
Adhesion in XPS (28 days): 0.15N/mm2
Adhesion in EPS (28 days): 0.10N/mm2
Capillary water absorption: < 0.4kg/m2min0.5
Coefficient of thermal conductivity (λ10, dry): 0.45W/mK
Water/steam diffusion coefficient (μ): 20
Field of application:
For gluing and leveling all types of thermal insulation tiles, for cladding facades and chocolatura. Also suitable for reinforcing mineral bases for later decorative coatings.
Preparation of the base:
The base must be clean without dust, oils or residues that become an obstacle in the connection between the layers. Basement cleaning is done mechanically or manually. For foundations that are not stable, it is necessary to install fixing wedges. The working time of the mixture is 2-3 hours, under normal temperature conditions (20°C). Mix with an electric mixer 7-8 liters of water with Bondex in a clean container, until a homogeneous and grain-free mass is achieved. Before leveling the surface, place the fixing pins depending on the installed plate, 5-6 pins/m 2 . Apply the product with the screed on the insulating board in a thickness of 3mm. While still fresh, apply the reinforcing mesh so that it sinks into the adhesive. In the corners or in the joints in doors or windows, it is necessary to apply the reinforcing mesh twice. The optimal working temperatures are from 5°C to 35°C. For subsequent coatings, it is important that the base has reached drying maturity in about 5-7 days, this depends on the atmospheric conditions.
Dekoll Termofix 2In1 White 25kg
Fibre-reinforced adhesive and leveler for thermal insulation boards, EPS, for facades and chocolatura.
It has very good workability and high moisture resistance. Maximum layer thickness for leveling up to 4mm and for sticking up to 30mm.
Technical Data:
Appearance: Powder
Packaging: 25kg
Color: White
Granulation: 0.7mm
Storage: Store in dry places on wooden pallets.
Storage time: 12 months from the production date
Water for mixing: 7.5-8 liters/bag
Application temperatures: From 5°C to 35°C.
Application thickness: Up to 3mm
Volumetric mass: 1.4kg/m3
Consumption: 7-8kg/m2
Compressive strength: 12N/mm2
Bending strength: 5N/mm2
Adhesion to concrete (28 days): 1.30N /mm2
Adhesion in XPS (28 days): 0.15N/mm2
Adhesion in EPS (28 days): 0.10N/mm2
Capillary water absorption: < 0.4kg/m2min0.5
Coefficient of thermal conductivity (λ10, dry): 0.45W/mK
Water/steam diffusion coefficient (μ): 20
Field of application:
For gluing and leveling all types of thermal insulation tiles, for cladding facades and chocolatura. Also suitable for reinforcing mineral bases for later decorative coatings.
Preparation of the base:
The base must be clean without dust, oils or residues that become an obstacle in the connection between the layers. Basement cleaning is done mechanically or manually. For foundations that are not stable, it is necessary to install fixing wedges. The working time of the mixture is 2-3 hours, under normal temperature conditions (20°C). Mix with an electric mixer 7-8 liters of water with Bondex in a clean container, until a homogeneous and grain-free mass is achieved. Before leveling the surface, place the fixing pins depending on the installed plate, 5-6 pins/m 2 . Apply the product with the screed on the insulating board in a thickness of 3mm. While still fresh, apply the reinforcing mesh so that it sinks into the adhesive. In the corners or in the joints in doors or windows, it is necessary to apply the reinforcing mesh twice. The optimal working temperatures are from 5°C to 35°C. For subsequent coatings, it is important that the base has reached drying maturity in about 5-7 days, this depends on the atmospheric conditions.
Barcode :
Write Your Own Review